您的位置:DICDER -- 博客专栏 >> 论坛 >> 功耗管理
帖子列表
-
Help:low power design
flowerah2 发表于: 2006-10-09, 回复: 4
刚接触低功耗,我看了有关的论文,虽然明白了门控时钟的原理,但是我还是不清楚,给出一个design,门控时钟如何插入?请高手告诉我流程,谢谢帮助!
-
Question about Power analysis
my problem: When a design like this, for example top a b sram I synthesised it with DC and verified the nestlist was correct. I set the...
-
Power Estimation Tool
ahan 发表于: 2006-10-03,
Somebody tell me that Sequence Tool-PowerTheater can estimate the power of chip from RTL code which have about 10% warp! Do Anybody have the same experienc...
-
RTL级的低功耗设计技巧
关闭未被使用的电路 a. 门控时钟 b. 操作数隔离选择低功耗的逻辑结构优化FSM状态编码和数据通路减少glitch信号最小化“dont care”状态出现提取共用项优化内嵌的存储器...
-
Customer Quotes
rickyice 发表于: 2006-09-07,
"PowerTheater is the only solution for RTL power analysis to help us reduce power consumption by 30% from an existing design in a relatively short time, with...
-
现在寄存器传输级的低功耗设计有没有一些...
aixinjueluoy 发表于: 2006-07-31, 回复: 4
我查到的一些资料里都是介绍的一般常用的三种方法:门控时钟、操作数隔离和存储器分区访问。我总结出来的,好像基本上就是在介绍这三种,其中门控时钟更是说的不计其数了...
-
low power
rickyice 发表于: 2006-07-30, 回复: 7
low power
-
Fight the Power
rickyice 发表于: 2006-07-25, 回复: 3
Fight the Power
-
热完整性:低功耗IC数字设计必备的技术
rickyice 发表于: 2006-07-05, 回复: 3
作者:Michael Santarini, EDN高级编辑 在本年度的设计自动化大会上,新老供应商都争相推出功率设计工具,旨在为数字 IC 设计师提供评估功耗的一种更好方法。...
-
大家讨论一下自己在设计时时如何考虑低功...
rickyice 发表于: 2006-06-28, 回复: 25
大家讨论一下自己在设计时时如何考虑低功耗的?
-
功耗源
yifeier 发表于: 2006-06-28, 回复: 4
分析功耗从分析功耗源开始,任何低功耗设计都是针对功耗源来做功耗的优化的 现在的大多数ic中,最重要的功耗源是电平翻转引起的功耗,电平翻转的时候,一半的耗能用于充...
-
PrimePower Manual.
rickyice 发表于: 2006-06-28, 回复: 9
PrimePower Manual.
-
功耗分析??
aixinjueluoy 发表于: 2006-06-28, 回复: 4
请问一些对功耗分析有经验的同行,在业界现在设计芯片的时候对功耗要求比以前强多了 一般都使用什么工具?最长用,而且得到的结论比较准确的工具有什么? 我也听到很多人...
-
有没有有关prime power的资料??
aixinjueluoy 发表于: 2006-06-28, 回复: 2
谁有prime power的手册,可不可共享一下,或者告知下载地址 多谢!
-
恭喜该版开张!
aixinjueluoy 发表于: 2006-06-28, 回复: 2
高兴啊!!!!
-
IC Power Consumption with Power Compiler
rickyice 发表于: 2006-06-27, 回复: 15
IC Power Consumption with Power Compiler
-
Power Reduction Through RTL Clock Gating
rickyice 发表于: 2006-06-27, 回复: 13
Power Reduction Through RTL Clock Gating
-
EDA aids power management in the desi...
rickyice 发表于: 2006-06-27,
Designers get the environment needed to achieve system-level power/performance estimation. Today, one in five IC designs fail in tape-out due to power-rela...
-
Placement-Driven Power Optimization a...
rickyice 发表于: 2006-06-27, 回复: 1
Today, chip designers are finding that traditional approaches to power reduction are no longer sufficient to meet their power goals. Enhanced clock gating, g...
-
Power
rickyice 发表于: 2006-06-27,
Suddenly, We Care For years it was like a slogan. "FPGAs are nice, but they're power hogs." For the customers that kept the lights on, howeve...